blind hole वाक्य
उदाहरण वाक्य
मोबाइल
- Some blind holes, and a window, account for changes in its use.
- Did we open cases that went down blind holes?
- This made it easy to turn and thread directly against an endstop, even into blind holes.
- "We concluded it was a blind hole, going nowhere, " he told The Arizona Daily Star.
- Through holes are easier to produce than blind holes which don't go through the entire part.
- The process can be performed on blind holes, but it requires an alternative tool design and suitable manufacturing conditions.
- Blind holes are created by pins that are supported at only one end; hence such pins should not be long.
- Next, through holes are preferred over blind holes ( holes that do not traverse the thickness of the work piece ).
- ;Bottoming tap or "'plug tap "': This feature enables a bottoming tap to cut threads to the bottom of a blind hole.
- Spiral flute taps are widely used in high speed, automatic tapping operations due to their ability to work well in blind holes.
- When two pieces of wood are to be joined by dowels embedded in blind holes, there are numerous methods for aligning the holes.
- It may be necessary to periodically remove the tap from the hole to clear the chips, especially when a blind hole is threaded.
- A blind hole was bored at each end, to the depth of the neutral plane, and the calibration marks were made at this depth.
- The plug tap is used to cut threads into a blind hole _ a hole that doesn't go all the way through the piece.
- When dowels are glued into blind holes, a very common case in dowel-based Fluted with multiple parallel grooves along their length to serve the same purpose.
- Thus thread forming is particularly suited to tapping blind holes, which are tougher to tap with a cutting tap due to the chip build-up in the hole.
- Single-pass bore finishing is not well suited for blind holes because the tool has a tapered lead on it which prevents the bottom of the hole from being finished.
- "I played here in the Walker Cup ( in 1975 ) and thought there were about 15 blind holes-- and I wasn't all that keen on the other three,"
- The current density effects typically associated with electroplating are not a factor, therefore sharp edges, deep recesses and blind holes are readily plated to uniform thickness with electroless nickel chemistry.
- If threads are to be cut to the bottom of a blind hole, the taper tap will be followed by an intermediate ( plug ) tap and then a bottoming tap to finish the operation.
- अधिक वाक्य: 1 2
blind hole sentences in Hindi. What are the example sentences for blind hole? blind hole English meaning, translation, pronunciation, synonyms and example sentences are provided by Hindlish.com.